Point Clouds in AutoCAD
Pointools Model imports point clouds via POD files into the AutoCAD environment and displays the points in the viewport with various controls over shading and visibility. Applications include drawing or modelling from point clouds or viewing a proposal within a point cloud. The plug-in can also be used to work with aerial LIDAR or vehicle based scanning data for larger scale urban mapping and planning.
POD files are Pointools own format but can be easily created from almost any scan format using Pointools View Pro, a free viewer / data importer that can be downloaded from the Pointools website. There is also a command line batch convertor for processing multiple files.
Performance
Pointools Model uses the graphics hardware for performance allowing the user to work faster and with larger datasets bringing even multi-billion point datasets within reach of modest hardware. With some modern 3D scanners delivering tens of millions of points in a matter of minutes, many projects will benefit from this approach whilst smaller projects can expect a performance boost. Larger projects which may have required chopping up into small chunks can now be bought in whole and using the plug-in’s select and hide tools area’s of interest can be quickly isolated within AutoCAD.
As you work, data loads in the background so AutoCAD operation is not blocked and there’s no waiting around for regens as you zoom in or pan around. Other than a simple frame rate slider ( balances density with speed during a pan or orbit), there are very few tuning options, the software seems to take care of this itself and adjusts as you work to keep things moving quickly.
Sections
Working in section is key to interpreting point cloud data and the plug-in makes it easy to do. Simply click the Add Section icon and a section is dropped into the viewport. The thickness can be adjusted and you get a real-time update as you reposition the section line. But perhaps the most important feature here is the ability to view a different section in each viewport. Examining scan data in two orthogonal sections really does make the difference when drawing detail that is not easy to see in elevation alone.
A section can also be set up to move along a polyline, useful for tunnels and rail like structures.
Shading
Point cloud data can be difficult to interpret and the plug-in offers a range of shading options to deliver clarity in almost any situation. These include point lighting, rgb, and rescaling the point intensities to bring out detail. Each viewport can have its own shading which can really help on more complex projects. The shade by distance works well on aerial LIDAR or building facades where it can help pick up surface detail that intensity or colour might not capture.
Fit 3D Surfaces to Point Clouds
Pointools Model makes it easy to auto generate 3D geometry such as pipes and plane surfaces through an area of selected points.
Every Point Counts
Zooming into the point cloud reveals every data point, you’re working with all the data all the time.
No need to regen!
Sharing
It’s good to share! Multiple users can work with the same point cloud data files simultaneously without locking each other out. Areas of the point cloud can be selected and hidden without affecting other users.
Screenshots
Further Information
Further information on Pointools Model is available at www.pointools.com, info@pointools.com.
|
